How to Clean Wax and Paraffin from Carpet

Carpets need maintenance and a conscious cleaning regime. Once you get your carpet area filled with magnificent carpets, you need to be extra cautious about what you do around it.

Your carpets at home are susceptible to many kinds of stains, such as wax and paraffin.

You may accidentally pour some hot liquid wax on your carpet while enhancing the look of your room. Also, some coloured wax can be all over your carpet due to coloured candles, wax crayons, etc. So not to worry. You can call professional carpet cleaners to remove the carpet fabric’s wax.

They follow a procedure that is the best way to get wax out of the carpet. You can also learn about the steps and prepare yourself for emergencies.

Let us see how professionals clean wax and paraffin from your carpet fibres.

How Do You Get Candle Wax Off Carpet And Upholstery?

Candle wax can easily ruin anything that it spills on. Be it your expensive upholstery or the carpet. You need to be cautious around the flooring that is covered with the carpet.

But unfortunately, even if paraffin or candle wax gets on your carpet, you can follow the steps and get it out of the fabric quickly and easily.

  • Prepare The Spot And The Things You Require

To begin well-prepared, you may need- a butter knife, iron, dryer, cleaning mop, ice packs, solvents, vacuum, brush and paper towels. You must mark the spot that needs attention and isolate it by keeping the affected site separated from the unaffected area.. Do not rub or try to spread the wax all around the unaffected areas.

  • Use Ice

Once you spot the wax spilt area, use an ice cube wrapped in a towel to freeze the ice. Frozen wax will lift from the carpet fabric and quickly get out of the fibres. Use a wrapped ice pack to prevent the wax and the carpet from getting wet and more damaged.

Ensure to keep the pack for a while till the wax solidifies.

  • Scrape The Area With A Knife To Get Rid Of Wax

Once the wax freezes, you can easily scrape off the frozen wax. Be gentle in the area, as you may not want the carpet to get damaged by scraping. Use a blunt knife and slowly, with light pressure, try to scrape it off. The solid wax can quickly get off with the knife. If it solidifies enough, it will come off entirely. If it does not, then you need to use iron.

  • Iron The Wax Stain Area

When the wax does not come off, you need to use iron on that area to warm the residual wax and get rid of it. You need to use a paper towel or dry towel and put the same on the affected area.

Put your iron at a low temperature and slowly iron the towel to melt the wax. The wax melted due to heat will get on the towel, and you can quickly get rid of it. Ensure to check the progress and stop when it gets off wholly.

  • Vacuum The Area

Once the wax is entirely off the carpet and scraped off by the knife, use a vacuum cleaner to get rid of the scraped wax. The scraped wax gets away from the fibre with a vacuum cleaner, and you can easily clean the area afterwards. Ensure to use the vacuum directly on the site. You can also use a soft bristle gentle brush to get the wax out of the carpet after you remove it from the fibre with ice and iron.

  • Clean The Spot

After you are done vacuuming, clean the spot. You may require some solvent to clean the area and remove the patch. Use eco-friendly solvents only as they are non-damaging for the carpet fabric. Use a mop and lightly rub the solvent over the spot. Wash and clean the solvent afterwards. Cleaning the site will help remove any residual wax left on the carpet, even after ironing the area.

  • Dry The Area

Dry the area with a dryer after you clean the spot. The carpet must be thoroughly dried after cleaning, as wet and damp carpets are susceptible to permanent damage. The dirt and dust, along with mildew, get on the carpet fabric and damage it ultimately. So after cleaning the carpet and washing the area, remember to dry the spot and make it completely water-free.

  • Deodorize And Sanitise The Area

After you complete the process, deodorise the carpet to neutralise the smell of the solvents, wax, and paraffin. Once you finish the process and get through with all the steps, sanitise the fabric to kill germs and allergens.

The whole process is to make your carpet wax-free and well-sanitised.

How Do You Get Color Wax Out Of Carpet?

You can get rid of wax by following the above-listed steps and returning your carpet to being spotlessly clean.

But if the wax that gets on the carpet is coloured or of wax crayons, you need to add one more step.

After you get away with the wax, you can treat the left tint with a dish wash or mild detergent.

You can also use organic bleaches afterwards. Pour the detergent on the affected spot and leave it for some time. Rub the area and let it settle.

After a few minutes, use water to take out the soap and the strain.

You can repeat the step to ensure the stains come out ultimately.

You can quickly get the stain out by being alert and working on the coloured wax stain immediately.

So carpet wax is not a pleasant situation and not at all welcome.

You can call professional carpet cleaners if the problem is too deep. They have the experience and all the required and acquired skills to get the carpet free from wax and stain afterwards.

They use eco-friendly solutions, and they have the required machines to work on the wax and its stains in a better way.

So call professional carpet cleaners when dealing with wax, paraffin or coloured wax to get the best result.

Why does the carpet smell after cleaning?

During carpet cleaning, you will want to get some air circulating in addition to draining the water. Drying the carpet after carpet cleaning should always be a priority to avoid musty odours. The time it takes for a rug to dry varies, but it should not take more than half a day in most cases.

The following are some of the reasons why your carpet smells worse after cleaning:

  • Lots of water left on the carpet: 

Have you ever washed the rug during the washing cycle but forgot to take it out of the washer and throw it in the dryer? When you find your fault, you realize that the clothes now stink. The odour may be microbial growth. Similarly, carpets left drenched for a long time will make the carpets smell like wet dogs. This is one of the reasons why you hire professionals with quality equipment to clean your carpets.

  • Cleaning low-quality carpets: 

Most people tend to set the service price ahead of its quality, and the same applies to professional carpet cleaning solutions. If the cleaning company you rented from is very fond of the budget, chances are you will find yourself with a foul-smelling carpet. The most common problem with cheap cleaning services is that the gear used to do the job is not strong enough to drain all the remaining water, leaving your carpet wet. If it is part of a residential cleaning service, the fan will be left on to simplify the drying process. Sometimes, the cleaner is inexperienced, uses a lot of detergents and does not wash the carpet properly.

Older or weaker machines do not absorb enough water. It is not uncommon for a professional carpet cleaner to use 25–50 gallons of water in homes. Under normal circumstances, a vacuum on a truck-carrying machine releases 90%-95% of this water back into the atmosphere, resulting in rapid drying periods. But, either because of user error, the low thrust of old materials, or cheap modern equipment, that discharge phase does not produce as much water as it should. This overheating is also familiar with rental equipment that people rent from grocery or hardware stores. To avoid these problems, you should always have your carpets cleaned by a professional compared to opting to do it yourself.

  • Drying carpet after cleaning: 

In addition to draining water during carpet cleaning, you also need to move the air. Drying the carpet after cleaning it should always be a place to keep things odourless. It should usually take no more than half a day.

Use fans and carpet fabrics to help dry carpets. You use high-speed fans that move from room to room to help airflow while cleaning customer carpets. We also use what is called a carpet rake to fix the carpet. This tool lifts all the rug strands and aligns them directly again. Doing so allows for faster drying.

Water damage causes bacterial growth, usually when we are called home to investigate a complaint that the carpet smells bad or is foul because it is mouldy. So you prefer to use the term “suspected bacterial growth” to not overdose.

  • Scenting out of the carpet: 

Removing foul odours from a carpet usually begins with a visual inspection of the carpet floor and pad. A wet or damaged carpet pad usually needs to be replaced. In most cases, the mat can generally be stored. The carpet is cleaned to support the surface of the carpet and to use an antiseptic solution.

Other common reasons for an awful carpet smell: 

There are several reasons why your floor door smells just after cleaning.

The smell of tobacco has the potential to quickly penetrate all kinds of fabrics and surfaces, including carpets, rugs, and curtains. This way, if you smoke regularly inside your house, even carpet technicians will not help to remove the odour.

Regular cleaning is required if you are a pet owner who is poorly trained and often carries dirt on the carpet. Pets’ urine has a clear structure, and it is a nightmare to remove the cloth. The same applies to the smell left behind. If the stain is not correctly cared for, the odour will trickle into the carpeting and underlay, making it difficult to remove. Old or persistent spots are one of the leading causes of bad smells. So, if you want to remove the unpleasant smell from your carpets, you have to have them deep cleaned.

Conclusion: If you want to know more about the reasons for the odour of carpets after cleaning, you can get in touch with carpet cleaning experts. We have a team for all types of cleaning services you may need for improving the overall condition of your house and things.